Monday, April 23, 2012

Variables Affecting the Efficiency of Roller Crusher

Roller Crusher, also known as sand creating machine, may be the most trustworthy and productive gear to crush the stones and is generally made use of in mining and petroleum industry. Despite its high efficiency in heavy market, the performance of roller crusher is often affected by five elements.

Firstly, the hardness with the material can influence the function of roller crusher directly. It is pretty challenging to produce sand with stuff which has a high stiffness. Besides, this type of stuff will lead to damage towards the machine. As a outcome, the efficiency plus the ability of sand making are going to be weakened. So we need to spend close attention to the material that we decide on.

Secondly, the physical components of material may have an effect on the conveying procedure with the rock crusher machine. If the raw material consists of thin silt, this kind of component will grow to be sticky through the conveying course of action, thus generating the process much more complicated. In this respect, we really should very carefully screen the raw material just before the complete method. Meanwhile, we'd better separate the thin silt to decrease the unfavorable impact it causes and make sure the right functioning with the machine.

Thirdly, to some extent, the degree of fineness of material has an effect on the ability of sand generating, generally speaking, the higher the requirement of fineness, the lower the performance of machine. So careful plan ought to be created in accordance with diverse requirement, but in most situations, we are able to set the degree of fineness at medium.

Fourthly, the degree of viscosity of material could shorten the longevity of a machine. That's to say, the material with higher degree of viscosity will readily get stick towards the wall of the stone crusher, if not be removed in time, the machine might not be able to function appropriately. For the reason that of this, we need to opt for material with lower degree of viscosity.

Lastly, the humidity degree of material might lead to clogging through the transportation method. When the material has a higher degree of moisture content material, clogging will take place in greater frequency. To solve this kind of dilemma, we've to keep a tight control from the humidity degree of material. If the material is wet, we are able to dry it by signifies of sun exposure or air drying.

With an international advanced level, roller crusher has already met the demand of lots of difficult jobs, in fact it has develop into indispensable for the improvement of heavy business, but to make the most effective of it, we cannot neglect the components mentioned above.

No comments:

Post a Comment